EMUKING

Backing up your own cartridges

EmuKing does not provide games. You bring your own file, and the intended way to get one is to read it off a cartridge you own, with a device made for the job.

This is worth doing for its own sake. Cartridges are old. The save batteries inside them are past their design life, the contacts corrode, and labels fade. Reading a cartridge to a file preserves it as it is today, and it lets you keep playing when the hardware eventually stops cooperating.

This guide covers backing up cartridges you own. EmuKing does not host, provide, or link to game files, and we will not help find them. Downloading a game you do not own is copyright infringement in most countries, whether or not you own another copy.

What a dumper actually does

A cartridge is a small circuit board with a memory chip, an edge connector, and often a bank switching chip and a battery. It is not encrypted or locked. A dumper is a device that holds the cartridge, powers it, and reads through its address range the same way a console would, sending the bytes to your computer over USB.

The result is a plain file that is a byte for byte copy of the chip. For a Game Boy game it is normally a .gb or .gbc file, and for Game Boy Advance a .gba file. Sizes run from 32 KB for early titles up to 32 MB for large Advance games.

Choosing hardware

Several devices do this. They differ mainly in how much assembly is involved and how many systems they handle.

TypeWhat it suitsNotes
Ready made USB dumperMost peoplePlug in, install the desktop app, insert cartridge, read. Handles Game Boy, Color and Advance, and reads and writes saves.
Open source kitTinkerers, wider system supportCheaper per system and supports many consoles, but expect to assemble a board and flash firmware.
Flash cartridge with a card slotPlaying backups on real hardwareSome can also copy saves. Not primarily a dumping tool.

Any of them produce the same kind of file. There is no quality setting and no compression choice: a correct dump of a given cartridge is identical no matter which device made it. That fact is useful, and it is the basis of the verification step below.

The process

  1. Clean the contacts first. Isopropyl alcohol on a cotton swab, along the gold edge connector, then let it dry completely. Most failed dumps are dirty contacts, not broken chips.
  2. Seat the cartridge fully in the dumper and connect it to your computer.
  3. Let the software identify the cartridge. It reads the header, which holds the internal title, the cartridge type, and the ROM and RAM sizes. If the title comes back as nonsense, stop and reseat: reading with a bad connection produces a corrupt file that may still look plausible.
  4. Read the ROM and save the file.
  5. Read the save memory too if the game has any. This is a separate operation and produces a .sav file.

Verifying you got a clean read

A dump can fail quietly. The simplest check costs nothing: read the same cartridge twice and compare the two files. They should be identical. If they differ, the connection is unreliable, so clean the contacts and try again.

On Windows you can compare with PowerShell:

Get-FileHash game1.gb, game2.gb -Algorithm SHA256

Matching hashes mean two reads agreed. That is strong evidence the dump is good.

Cartridges also carry a header checksum that dumping software will normally verify for you. It is a weaker check than comparing two full reads, but a failure is a clear sign something is wrong.

Rescuing the save before it disappears

This is the part people wish they had done sooner. If a cartridge still remembers your childhood save file, that save is being held alive by a battery that is decades old. When it dies, the save is gone permanently.

Any dumper that reads save memory can copy it to a .sav file. Do that now, while the battery is still working, for any cartridge whose save you care about. Once you have the file the save is safe, and you can carry on that same playthrough in EmuKing by loading the game and pressing Import .sav.

Replacing the battery is possible and well documented, but it usually erases the save in the process unless you power the board while swapping it. Copy the save off first regardless.

Using the file here

Open the Game Boy and Color page or the Game Boy Advance page, then press Load ROM or drag the file onto the page. It is read directly by your browser and is never uploaded. Games you load are kept on your own device so you do not have to find the file again next time.